��ñ��

Advertisement

Connecting the composites industry

All Topics See All

Additive Manufacturing

Adhesives

Advanced Air Mobility

Aerospace

Application

ATL/AFP

Autoclave

Automation

Automotive

Biomaterials

BMI

Bonding

Braiding

CAMX

Carbon Fibers

Ceramic Matrix Composites

Coatings

Composites 4.0

Composites Basics

Compression Molding

Construction

Consumer

Core

Curing

Custom Content

Cutting/Kitting

CW Top Shops

CW Trending

Cyanate Ester

Defense

Design & Tooling

Design and Testing

Design/Simulation

Digital Demos

Digitization

Economics

Editorial

Electric Vehicles

Electronics

Epoxies

Fabrics/Preforms

Fastening

Feature

Filament Winding

Finishing & Fastening

Focus on Design

FRP Rebar

Glass Fibers

Global Composites

Graphene

Hi-Temp Resins

Hydrogen Storage

IACMI

Infrastructure

Infusion

Injection/Overmolding

Inside Manufacturing

JEC

Job Postings

Ketones

Lifecycle Analysis

Machining/Drilling

Marine

Market Outlook

Markets

Mass Transit

Materials

Materials Testing

Medical

Molds/Tools

Nanomaterials

National Composites Week

Natural Fibers

NDT

Out of Autoclave

PAEK

Past, Present and Future

PEEK

PEKK

Plant Tours

Post Cure

Predicting Failure

Prepregs

Pressure Vessels

Processes

Pultrusion

Recycling

Reinforcements

Repair

Resins

RTM

Sensors

Sheet Molding Compound

SHM

Space

Startups & Investors

Sustainability

Thermoplastics

Trends

Troubleshooter

Weaving

Welding

Wind/Energy

Work In Progress

Workforce Development
Markets See All

3 Jul 2025 Design/Simulation
Using multidisciplinary simulation, real-time process monitoring to improve composite pressure vessels
Multi-pronged approach closes the loop between design and production of Type 3, 4 and 5 pressure vessels, enabling simulation of as-built composite tanks to improve performance and storage capacity while reducing weight and cost.

19 Jun 2025 Defense
What you might have missed at Paris Air Show 2025
A surge in defense spending, partnerships in hydrogen propulsion and new combat aircraft agreements, many backed by composites industry leaders, culminated the 55th Paris Air Show.

17 Jun 2025 Trends
Cygnet, Viritech recover H2 tank continuous carbon fibers in Ford FCVGen2.0 project
Partner technologies have demonstrated the viability of recycled continuous fibers and the potential for automotive tanks to be recycled at meaningful rates.

13 Jun 2025 Advanced Air Mobility
Archer raises $850 million, accelerates U.S. eVTOL rollout
The additional funds further support Archer’s liquidity position of approximately $2 billion in anticipation of Midnight’s commercialization.

4 Jun 2025 Advanced Air Mobility
Archer pilots Midnight, advances to next phase of flight testing
Flight operations tested the composites-intensive aircraft’s VTOL and CTOL capabilities, important for its civil and defense operations.

2 Jun 2025 Carbon Fibers
AMSL Aero makes H2 testing milestones for hybrid Vertiia eVTOL
Bankstown and Wellington fuel cell work has helped to verify Vertiia’s powertrain while also feeding electricity into the airport grid, bringing the composites-intensive Australian aircraft closer to flight.
Design & Tooling See All

8 Jul 2025 CAMX
Hybrid mold release agent offers paste wax simplicity with semipermanent performance
CAMX 2025: Chem-Trend’s 2775W represents a solution for composites manufacturers who want high performance without the operational changes required by solvent technologies.

3 Jul 2025 Pressure Vessels
Using multidisciplinary simulation, real-time process monitoring to improve composite pressure vessels
Multi-pronged approach closes the loop between design and production of Type 3, 4 and 5 pressure vessels, enabling simulation of as-built composite tanks to improve performance and storage capacity while reducing weight and cost.

26 Jun 2025 Molds/Tools
Eco-friendly precision tooling offers flexibility, consistency
CAMX 2025: For more than 50 years, Coastal Enterprises has supported design, prototyping and composite layup applications with its Precision Board urethane tooling board and custom bonding offerings.

9 Jun 2025 Molds/Tools
Moore Brothers Co. acquires Symmetrix Bristol in Rhode Island
Merging of the two teams, which includes the acquisition of Symmetrix’s composite tooling assets and a move to its flagship facility, will establish wide-ranging and complementary skills.

6 Jun 2025 CAMX
Noncontact optical strain gage delivers complete 3D surface measurement insight
CAMX 2025: The Aramis system by Trilion, based on DIC and photogrammetry technology, performs high-precision measurements in the sub-micrometer range, across a wide range of testing environments and material types.

5 Jun 2025 CAMX
LFAM specialization caters to 3D printed composite tooling, molds
CAMX 2025: AES is committed to driving technological advancement and application development in 3D printing, distinguishing its diverse capabilities through several tooling examples.
Materials See All

7 Jul 2025 Defense
Cornerstone adopts new name, expands AM assets with Roboze Argo 1000 Hypermelt
Now CRG Defense, the firm is expanding its role as a defense tech platform with the ability to produce aerospace-grade polymer and composite parts at scale.

7 Jul 2025 Carbon Fibers
Exel Composites white paper calls for grid modernization using HTLS conductor cores
Free white paper analyzes and quantifies the benefits of high-temperature, low-slag carbon fiber conductor cores which have the potential to bring aging grid infrastructure up to speed.

7 Jul 2025 Global Composites
An Indian composite materials market forecast for 2025-2030
The composite materials industry in India is witnessing a pivotal transformation as it targets a comprehensive ecosystem, characterized by growth and self-sufficiency in production.

7 Jul 2025 CAMX
Real-time part printing exhibits LSAM’s industrial scale capabilities
CAMX 2025: Thermwood’s presence at CAMX showcases composite additive manufacturing at industrial scale, from daily LSAM Additive Printer 510 demos with various material suppliers to a complete parts display.

6 Jul 2025 Thermoplastics
Specialized racing bicycle wheel sets feature Arris CFRTP spokes
The CLX Sprint and CLX III bikes are being marketed as the “fastest race wheels,” with co-developed aero-shaped spokes that save 96.6 grams in weight and increase strength by 20%.

3 Jul 2025 Curing
Epoxy resins, curing agents and reactive diluents
CAMX 2025: Royce Global adds to its epoxy product lines with toughened epoxy resins and mercaptan curing agents that assist in high-performance environments.
Processes See All

8 Jul 2025 CAMX
Digital cutting, kitting streamlines advanced materials handling
CAMX 2025: Zünd is showing how it combines intelligent cutting systems and software to boost productive composites environments, as well as recent technology synergies with Loop Technology.

7 Jul 2025 Additive Manufacturing
Cornerstone adopts new name, expands AM assets with Roboze Argo 1000 Hypermelt
Now CRG Defense, the firm is expanding its role as a defense tech platform with the ability to produce aerospace-grade polymer and composite parts at scale.

7 Jul 2025 Additive Manufacturing
Real-time part printing exhibits LSAM’s industrial scale capabilities
CAMX 2025: Thermwood’s presence at CAMX showcases composite additive manufacturing at industrial scale, from daily LSAM Additive Printer 510 demos with various material suppliers to a complete parts display.

3 Jul 2025 CAMX
Epoxy resins, curing agents and reactive diluents
CAMX 2025: Royce Global adds to its epoxy product lines with toughened epoxy resins and mercaptan curing agents that assist in high-performance environments.

3 Jul 2025 Automation
Vericut Icam Suite V26 achieves precision with intelligent postprocessing
Smarter automation and deeper integration features support composites manufacturers’ abilities to configure and control postprocessing technologies.

1 Jul 2025 Sustainability
Materi’act launches NAFILean Vision biocomposite
NAFILean materials family blends low-carbon recycled plastics and renewable post-consumer sources like hemp fibers to provide a sustainable, visually appealing solution for automotive parts.
Composites 101 See All

30 Jun 2025 Troubleshooter
Selecting a meter/mix dispensing machine
Choosing the right meter/mix dispensing machine requires careful evaluation of key material and process parameters to develop a precise specification, ensuring key metrics such as accuracy, output, reliability, quality and maintenance efficiency.

28 May 2025 Market Outlook
Composites end markets: Energy (2025)
Despite political and supply chain challenges, renewable and nuclear energy continue to grow in use. Composite materials enable current and future energy technologies across sectors.

7 May 2025 Automation
Laser cleaning in composites manufacturing
Laser cleaning technologies for cleaning production molds for composites offer alternatives to harsher, less-friendly methods with features like automation and higher power cleaning.

30 Apr 2025 Composites Basics
Composites end markets: Aviation and advanced air mobility (2025)
Despite persistent supply chain issues, markets were set for healthy growth before Trump policies and tariffs, yet long-term trends favor composites in new platforms. Meanwhile, advanced air mobility shakes out and moves forward.

25 Apr 2025 Design and Testing
Crashworthiness testing of composites: A building block approach, Part 3
Third in a series on crashworthiness testing analyzes the upper levels of the building block approach and the importance of numerical analyses.

31 Mar 2025 Electronics
Plasma moves beyond improved bonding to coatings, multifunctional composites
Plasmatreat cold plasma systems clean, activate surfaces and apply nanocoatings for dielectric barriers and more.
- Webinars
- Events
- Suppliers
- Whitepapers
Webinars See All

On Demand
3D Printing with Thermoplastic Composites
KraussMaffei, a leader in plastic processing equipment, recently entered the large format additive manufacturing world with their gantry and robotic 3D printers. KraussMaffei will share the features, benefits and differences between these systems and present several use cases across multiple industries. Large scale additive manufacturing (LSAM) systems have come a long way over the last 10 years. Their speed and accuracy and wide range of materials they can print with have opened up new opportunities in tooling, fixtures, jigs, prototypes and more. In the automotive, aerospace and general manufacturing sectors. Join KraussMaffei as they explore these technologies and how to apply them. Agenda: Brief introduction to KraussMaffei Why KraussMaffei entered this market Review the features of gantry and robotic systems Discuss the wide range of materials currently available Explain the qualification process for new materials Evaluate the key differences between gantry and robotic LSAM printers Share various applications of tooling, fixtures and jigs across automotive, aerospace and other industries Review how companies can work with KraussMaffei to develop an AM Strategy

On Demand
Fixing the Core of the Grids: Powering the Future with Composites
The world’s electrical grids are under pressure. Decades-old infrastructure, rising urban power demands and the rapid expansion of data centers and electric vehicles are creating a widening gap between power supply and consumption. The need for fast, efficient and sustainable solutions has never been more urgent. In this webinar, Heini Kloster, product manager for Conductor Cores, and John Mertic, sales manager at Exel Composites will explore how carbon fiber composite cores and reconductoring can help modernize transmission infrastructure — without starting from scratch. You will learn how this innovative technology enables high- temperature, low-sag (HTLS) performance, reduces energy losses and helps transmission system operators (TSOs) to increase capacity quickly by using existing powerline structures. Exel will also explain the key differences between single-wire and multi-wire composite cores, and how Exel’s continuous pultrusion manufacturing and decades of composites experience ensures quality, flexibility and scalability for global infrastructure upgrades. Join this webinar to find out how reconductoring with composite cores can eliminate bottlenecks, cut costs and increase transmission capacity in a more sustainable, compliant and future-proof way. Agenda: Why are grids under pressure? The gap between demand and capacity, aging infrastructure and regulatory delays in new line construction What is reconductoring and why does it matter? The power of composites: a deep dive into carbon fiber conductor cores key benefits Single-wire vs. multi-wire composite cores: what TSOs need to know when choosing between performance, flexibility, and installation safety Real-world results: case example Benefits of pultrusion

On Demand
Enhancing Composite Durability and Aesthetics with PVF Film
This session explores the properties of polyvinyl fluoride (PVF) film and its role in improving the durability and performance of composite materials. PVF film has been widely used in various industries due to its resistance to UV exposure, moisture, stains and corrosion. Beyond protection, it also enables process flexibility and customized surface aesthetics. Agenda: The unique characteristics of PVF film and how it enhances durability in extreme environments. The history and applications of PVF film in composite materials, including interior and exterior use cases. Its role as a silicone-free release liner for achieving different surface finishes. The environmental considerations of PVF film as a non-PFAS material.

On Demand
An Overview Into the New ISO TS for Graphene-Related 2D Materials
Caio Lo Sardo, VP of MITO Material Solutions has taken a leading role in the first graphene document in development led by the U.S. committee within the International Organization for Standardization (ISO) Technical Committee (TC) 229, Nanotechnologies. Right now, when looking at graphene materials, no standard exists to classify graphene-related 2D materials and ensure the material will have concise technical specifications. The new standard includes a framework that is tailored to be useful for users, academia and regulators. This project will establish consensus-based parameters for commercial graphene purchases to confirm the material data sheets meet the expected standards. During this overview, Caio will share insights into the compilation of framework that have been built around graphene, with industry peer review, the study of the characteristics and zero in on what matters going forward for people who use graphene.

On Demand
AI-Powered Quality Assurance in Laser Projection Processes
Combining advanced laser projection technology with AI-powered inspection delivers unmatched precision and efficiency. By attending this webinar, you will learn how AI enhances quality control in laser-guided manual composite manufacturing. Gain insights into detecting foreign objects (FOD) and verifying parts placement with LAP's INSPECT-PRO AI camera system. This system seamlessly integrates with LAP's CAD-PRO laser projection systems to optimize your composite production. Discover how AI-powered camera systems identify potential issues early on, preventing escalation, reducing rework and minimizing waste. Agenda: Why AI-powered QA for composite manufacturing? Black-on-black detection capabilities Precise placement verification Instant foreign object detection Seamless integration with the LAP ecosystem

On Demand
Using Recycled Carbon Fiber Nonwovens to Accelerate AAM Development
Advanced air mobility (AAM) is reshaping the future of passenger and cargo transport, prioritizing lightweight and sustainable materials to drive advancements in electric flight and unmanned aerial vehicle (UAV) technology. In this webinar, Dr. Mandy Clement and Dr. Tim Swait will present a recent collaboration between the Advanced Manufacturing Research Centre (AMRC) and James Cropper. This pioneering project focused on developing reinforced UAV wing skins that offer strength, lightweight properties and recyclability in equal measure. In the project, the emphasis was on the use of advanced manufacturing techniques, such as tailored fiber placement (TFP), to precisely reinforce critical areas of the UAV wing skin without adding unnecessary weight. James Cropper’s recycled carbon nonwovens are utilized within the project to facilitate part manufacture via TFP, providing a lightweight substrate for continuous fibers to be stitched to, thereby improving handling during production. The webinar will focus on the project’s main objectives, discussing the challenges and material validation that resulted in the delivery of highly efficient, lightweight UAV structures with sustainable materials integral to the design and successful manufacture. Agenda: Introduction to the AMRC’s project to develop lightweight, reinforced wing skins for a UAV demonstrator The selection and testing of materials to support UAV part design and manufacture An overview of recycled carbon nonwovens covering their structure, supply, key differences from virgin fiber and the benefits they offer The main conclusions from the project, outputs and next steps

17 Jul 2025 New & Upcoming
High Temperature Composite Material Solutions for Aerospace and Defense Register Now
Events See All

4 Aug 2025
24th International Conference on Composite Materials (ICCM24)
The University of Delaware Center for Composite Materials (CCM) is hosting ICCM 24 as part of it 50th anniversary celebrations. The conference will feature a dedicated industry track, international networking opportunities and cutting-edge research and insights.

25 Aug 2025
National Composites Week 2025
The goal of National Composites Week is to celebrate and bring attention to the myriad ways that composite materials and composites manufacturing contributes to the products and structures that shape the American manufacturing landscape today. Learn how you can participate in this year's National Composites Week on NationalCompositesWeek.com.

3 Sep 2025
PU China/UTECH Asia
PU China/UTECH Asia 2025, a leading event for the Chinese polyurethane market, will take place at the Poly World Trade Expo in Guangzhou, September 3-5 2025. The event alternates between Shanghai and Guangzhou each year to allow exhibitors access to the polyurethane industry that is spread across the China.

8 Sep 2025
The Composites & Advanced Materials Expo (CAMX)
CAMX - the Composites and Advanced Materials Expo Bringing together ideas, science, and business connections that are creating the materials and products of the future. Join an incredibly diverse group of manufacturers, OEMs, innovators, suppliers, distributors, and educators as they present the latest advancements in composites manufacturing, product design, and materials engineering. From aerospace to automotive, construction to marine, industrial manufacturing to sporting goods, CAMX is the place to replace the materials of yesterday with more cost-efficient, high-performance composites that can form a brighter future.

13 Sep 2025
Automotive Composites Conference & Expo 2025
Join the ACCE 2024 event and learn about how the automotive and transportation industries are advancing with composites playing a key role in the development of electric vehicles and sustainability initiatives worldwide. Lightweight composites are ideal materials for improving vehicle performance, reducing mass, extending range and compensating for battery weight. Polymer composites are enabling lower emission vehicles, reducing the carbon footprint and saving energy to benefit the environment now and in the future. Thermoset and thermoplastic composites are the key to EV, Mobility and Sustainability.

15 Sep 2025
MECAM Expo 2025
The Middle East and Africa’s advanced composites market is projected to grow at a CAGR of 6.7%, reaching USD 2,699.88 million by 2028, with key markets like the UAE and Saudi Arabia driving this expansion. Sectors such as oil, civil engineering, and electronics are fueling the demand for advanced materials. With two successful events under its belt, the Middle East Composites and Advanced Materials (MECAM) Expo 2025 stands as the region’s largest and most influential platform for the composites and advanced materials industry. It brings together leading global brands and emerging innovators from across the MEA region, connecting them with manufacturers, suppliers, distributors, and buyers. Attendees will have access to the latest technologies, products, and services, making it the ideal platform for showcasing cutting-edge solutions and tapping into new international markets. As the only dedicated exhibition and conference for the composites and advanced materials sector in the region, MECAM Expo has become a crucial meeting point for industry professionals. MECAM Expo will return for its third edition from September 15-17, 2025, at the Dubai World Trade Centre, UAE.

10 Jul 2025 New & Upcoming
Aerospace Day 2025 Register Now
Suppliers See All

Additive Manufacturing

Business Development

Cleaning & Pretreatment

Inspection, Testing, Measurement

Manufacturing Execution & Automation Software & Controls

Manufacturing Services

Materials

Pollution Control & Sustainability

Supplies

Temperature/Pressure Control Equipment

Workholding

Get Listed!
Thousands of people visit our Supplier Guide every day to source equipment and materials. Get in front of them with a free company profile.
Whitepapers See All

10 Jan 2024
Jetcam addresses the economic importance of efficient material nesting
Jetcam’s latest white paper explores the critical aspects of nesting in composites manufacturing, and strategies to balance material efficiency and kitting speed.

8 Jan 2024
Arris Composites demonstrates advantages of natural fibers applied with Additive Molding
Arris presents mechanical testing results of an Arris-designed natural fiber thermoplastic composite in comparison to similarly produced glass and carbon fiber-based materials.

27 Dec 2023
Cevotec white paper presents novel approach for H2 tank production
Cevotec, a tank manufacturer, Roth Composite Machinery and Cikoni, have undertaken a comprehensive project to explore and demonstrate the impact of dome reinforcements using FPP technology for composite tanks.

23 Nov 2023
KCARBON and KIST develop lyocell/PLA/wood biocomposites
Initial demonstration in furniture shows properties two to nine times higher than plywood, OOA molding for uniquely shaped components.

1 Nov 2023
Exel Composites releases guide for design considerations in composite tubes
The composite tubes white paper explores some of the considerations for specifying composite tubes, such as mechanical properties, maintenance requirements and more.

21 Jul 2023
UAMMI white paper addresses composites recycling in Utah
Foundational research discusses the current carbon fiber recycling landscape in Utah, and evaluates potential strategies and policies that could enhance this sustainable practice in the region.
Articles See All

3 Jul 2025 Design and Testing
Using multidisciplinary simulation, real-time process monitoring to improve composite pressure vessels
Multi-pronged approach closes the loop between design and production of Type 3, 4 and 5 pressure vessels, enabling simulation of as-built composite tanks to improve performance and storage capacity while reducing weight and cost.

2 Jul 2025 Post Cure
Post Cure: Bionic fiber placement produces load-optimized, nature-inspired thermoplastic composite preforms
Fibionic’s fibionic fiber placement (FPP) technology enables the development of “fiber skeletons,” semi-finished parts suitable for any application that incorporates composite reinforcement exactly where it is needed.

2 Jul 2025 Startups & Investors
Die Mannschaft of composites innovation in Germany
A robust industrial base, top-tier academic institutions and regulatory momentum around sustainability makes Germany a sought-after region by investors and startups alike.

30 Jun 2025 Troubleshooter
Selecting a meter/mix dispensing machine
Choosing the right meter/mix dispensing machine requires careful evaluation of key material and process parameters to develop a precise specification, ensuring key metrics such as accuracy, output, reliability, quality and maintenance efficiency.

26 Jun 2025 Defense
Converting carbon fiber for UHTCMC to 3500°C
Advanced Ceramic Fibers LLC demonstrates ultra-high temperature ceramic matrix composites using SiC and other metallic carbides for applications in aerospace, defense, energy and more.

24 Jun 2025 Sustainability
Scaling up thermoplastic composites recycling
Thermoplastic composites are always said to be “recyclable.” Netherlands-based recycler Spiral RTC discusses the process, challenges, applications and opportunities to building a real recycling ecosystem.

7 Jul 2025 Global Composites
An Indian composite materials market forecast for 2025-2030
Sustainability See All

27 Jun 2025 Sustainability
Clean Aviation Pax Cabin Demonstrator uses biocomposites to cut weight, environmental impact
Full-scale regional aircraft fuselage equipped with cabin structures and systems demonstrates next-gen interiors to TRL 6 with successful FST, noise and vibration testing performance.

25 Jun 2025 Recycling
Westlake Epoxy collaborates with Alpha Recyclage Composites
Westlake customers will have connections to Alpha’s expanded recycling capacity and support for rCF material integration in new forms, applications.

25 Jun 2025 Wind/Energy
Oceanbird wing sails to demonstrate wind-based marine propulsion
Part of project Orcelle Horizon, the composites-intensive, 560-square-meter structure will undergo ground-based testing before installation on a demonstrator shipping vessel.

24 Jun 2025 Recycling
Scaling up thermoplastic composites recycling
Thermoplastic composites are always said to be “recyclable.” Netherlands-based recycler Spiral RTC discusses the process, challenges, applications and opportunities to building a real recycling ecosystem.

18 Jun 2025 Sustainability
Terra Agri, Midwest Composites cut agriculture CO2 emissions with biocomposite drone canopy
Canopy covers use empty fruit bunch (EFB), woven jute and nonwoven kenaf to enhance durability and reduce environmental impact of drones engineered for enterprise agriculture in Indonesia and Malaysia.

17 Jun 2025 Sustainability
CRP Technology obtains ISO 14001:2015 certification
3D printing company strengthens its industrial model by combining environmental sustainability, technological innovation and strict process control.

1 Jul 2025 Automotive
Materi’act launches NAFILean Vision biocomposite
Knowledge Centers

Automated Composites
In this resource, CGTech offers vital information about the benefits, processes, and vendors behind automated composite manufacturing.

��ñ�� Collections
CW’s editors are tracking the latest trends and developments in tooling, from the basics to new developments. This collection, presented by Composites One, features four recent CW stories that detail a range of tooling technologies, processes and materials.

Sensors for Composite Processing

The Now and Next in Composites

High-Temp Composite

Sustainability
The composites industry is increasingly recognizing the imperative of sustainability in its operations. As demand for lightweight and durable materials rises across various sectors, such as automotive, aerospace, and construction, there is a growing awareness of the environmental impact associated with traditional composite manufacturing processes.
CW Tech Days

Composites in Infrastructure and Construction
��ñ��’s CW Tech Days: Infrastructure event offers a series of expert presentations on composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Composites in Advanced Air Mobility
Explore the cutting-edge composites industry, as experts delve into the materials, tooling, and manufacturing hurdles of meeting the demands of the promising advanced air mobility (AAM) market. Join us at CW Tech Days to unlock the future of efficient composites fabrication operations.

Thermoplastics for Large Structures
Thermoplastics for Large Structures, experts explored the materials and processing technologies that are enabling the transition to large-part manufacturing.

Sustainability in Composites Manufacturing
Explore the technologies, materials, and strategies that can help composites manufacturers become more sustainable.

Design, Simulation and Testing Technologies for Next-Gen Composite Structures
��ñ��’s Tech Days: Design, Simulation and Testing Technologies for Next-Gen Composite Structures is designed to provide a multi-perspective view of the state of the art in design, simulation, failure analysis, digital twins, virtual testing and virtual inspection.

New Space Applications
Explore the technologies, materials and strategies used by composites manufacturers working in the evolving space market.

Bonding and Welding
Explore the latest technologies and strategies involving bonding and welding, essential processes in the assembly and manufacturing of composite materials, providing reliable methods for joining components.

Merging Materials and Technologies for Infrastructure and Construction
During this CW Tech Days event, sponsored by Composites One, experts will offer presentations to review and evaluate the composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Composites in the Hydrogen Economy
In these sessions, experts will discuss the emerging hydrogen economy and the opportunities for composites in this lucrative space.
Collections See All

Composites in Hydrogen Storage
A report on the demand for hydrogen as an energy source and the role composites might play in the transport and storage of hydrogen.

Recycled Composites
This collection features detail the current state of the industry and recent success stories across aerospace, automotive and rail applications.

Thermoplastic Composites
This collection details the basics, challenges, and future of thermoplastic composites technology, with particular emphasis on their use for commercial aerospace primary structures.

Tooling
This collection features recent CW stories that detail a range of tooling technologies, processes and materials.

Carbon Fibers

Aerospace 24 Mar 2020

New Solvay materials, processes designed for industrialization

Solvay is launching and promoting materials and processes developed for industrialized processes.

Out of Autoclave 23 Mar 2020

New Hexcel materials target marine, automotive, sporting goods

Hexcel is showcasing new composites technologies and parts that have been developed for the marine, automotive and sport industries.

Carbon Fibers 23 Mar 2020

Voith updates roving applicator generation technology

Voith GmbH is featuring carbon fiber-reinforced polymer (CFRP) components such as tailored stacks for the automotive and aerospace sectors.

Carbon Fibers 23 Mar 2020

Sustainability matters: Now, not just in the future

Public opinion on plastics will sharpen the focus on sustainability in composites manufacturing.

Fabrics/Preforms 22 Mar 2020

Bally Ribbon Mills technology features infusion for 3D woven joints

Woven fabrics manufacturer Bally Ribbon Mills is highlighting its film infusion capabilities for 3D woven joints woven thermal protection systems and more.

Carbon Fibers 20 Mar 2020

Teijin's Sereebo CFRTP adopted for 4K video cameras

Carbon fiber-reinforced thermoplastics add strength, reduce weight for Panasonic camera components.

Defense 17 Mar 2020

Composite Resources, Pyromeral form manufacturing alliance

Composite Resources will use Pyromeral materials and processes to fabricate composite parts and structures for high-temperature defense applications.

Machining/Drilling 15 Mar 2020

Finishing tools prevent delamination in hybrid material machining

Seco Tools’ JC898 rougher and JC899 finisher are designed for use with hybrid CFRP-metal stacked materials for aerospace applications.

Carbon Fibers 12 Mar 2020

Daher composite-metal winglets enhance performance of new Gulfstream G-700 large-cabin bizjet

The winglets are manufactured at the Daher factory in Tarbes, France and assembled into the aircraft at the Gulfstream’s Savannah plant.

Carbon Fibers 12 Mar 2020

Neenah Inc. acquires Vectorply Corp.

The closing is expected to be completed April 1.

Advertisement

Advertisement

Advertisement

Advertisement

Advertisement

Advertisement

microwire technology for composites

Advertisement

Advertisement

Advertisement