ATL/AFP
Towpreg Proves Cost-competitive For Wound Pressure Vessels
Design group's new winding option streamlines new pressure vessel development.
Read More
Isotruss offers amazing strength and material savings
The three-dimensional composite truss structure is the lightest and most efficient structural tube available.
Read More
Composites Air Cans Lighten Riser Loads
Low-pressure air cans, designed to add buoyancy to a spar platform’s riser string, are good candidates for composite materials. Up to 12 ft/3.7m in diameter and from 30 to 60 ft/9.2 to 18.5m long, the hollow structures support the riser weight and take load off of the platform’s hull. Typically installed insid
Read More
Design Issues
Typical FRP pipe is reciprocally filament wound with a fiber angle of ±54.75° relative to the longitudinal (0°) axis. This architecture satisfies stress loads in both the circumferential (hoop) and longitudinal (axial) directions for most pipes and pressure vessels. It withstands the in-use pressure, ther
Read More
Issues With Design
Though steel is the traditional material for coiled tubing because of its low price, it is susceptible to corrosion, fatigue failure (caused by repeated coiling and uncoiling), and troublesome joints. In larger sizes, its weight can increase transport difficulties. With the advent of secondary recovery methods
Read MoreDownhole Composites Boost Durability, Drillability
Halliburton Energy Services, Schlumberger Oilfield Services, Weatherford International, and Baker Oil Tools, all based in Houston, Texas (U.S.A.), offer composite downhole tools — made with both thermoplastics and thermoset resins — for a variety of applications. Halliburton’s FasDrill packers and plugs
Read MoreProven Performance In A Chemical Line Installation
EDO Specialty Plastics (Baton Rouge, La., U.S.A.) filament winds composite pipe and fittings for offshore facilities platforms and rigs. Founded in 1973 as Specialty Plastics and acquired by EDO in 1998, the company manufactures industrial fiberglass piping systems for the chemical, petrochemical and pulp and
Read MoreA Different, All-Composite Approach
Fiberglass Structural Engineering Inc. (FSE, Bellingham, Wash., U.S.A.) has patented its innovative concept for a hybrid fiberglass and steel platform. Approximately 50 percent of the volume of a conventional steel spar hull would be replaced by hollow filament-wound Eglass and vinyl ester tubes, from 10 ft to
Read MoreComposite Accumulator Bottles Perform In Service
A riser tensioning system for a TLP consists of a tensioning ring and framework, with four to eight hydraulic cylinders — each with an attached pressure vessel or “accumulator bottle” — to support and allow movement of the rigid riser pipe. Installed in the riser wellbay, this primary structural system is desi
Read More