European offshore wind headed toward 2016 slowdown?
MAKE Consulting's latest report on global offshore wind power says to expect a capacity expansion slowdown in Europe in 2016, followed by robust growth through 2023.
MAKE Consulting (Aarhus, Denmark) reported on Dec. 19 that it has published a new report on offshore wind energy titled "Global Offshore Wind Power 2014." In it, MAKE says that as the offshore wind industry makes progress to reduce cost of energy in support of an outlook for global average annual growth of 22% to 2023, the European near-term outlook shows a sharp decline of more than 60% in grid-connected offshore wind capacity in 2016 compared to 2015, as the UK nears transition in subsidy schemes and as German project installations peak at close to 2 GW in 2015. Impact to the supply chain is expected to be softened by strong 2017 demand.
MAKE says the global offshore wind market has grown an average more than 30% annually in the last five years, bringing expected global grid-connected capacity to more than 9 GW at the end of 2014 — equivalent to 2.7% of global wind power capacity. In 2014, 2.3 GW of offshore wind capacity will be grid-connected, with Europe accounting for close to 80% of total market size.
Despite declining activity in the UK in 2015, MAKE says next year is set to be another record year for the offshore wind industry, based on peaking German project installations and the Chinese offshore wind development gaining momentum. Globally, MAKE expects 51% growth in 2015. Sustained growth in Asia-Pacific, however, is not able to balance the sharp decline in new grid-connected capacity expected in the UK and Germany in 2016. Depending on market exposure and position in the value chain, impact will vary across the supply chain.
The global offshore wind market is expected to show strong long-term growth rates from 2017, and MAKE expects the market to grow at a 22% CAGR from 2014 to 2023. By 2023, total offshore wind capacity is expected to reach a staggering 82 GW, equivalent to 9.3% of global wind power capacity. By then, says MAKE, APAC will account for 40.4 GW of this capacity and will have caught up with Europe, which will account for 39.4 GW. China will be the main driver for offshore wind growth in APAC, but Japan, South Korea and Taiwan will also make contributions. Annual installed capacity in Europe will vary between 3 GW to 5 GW from 2017 to 2023, supported by national and EU polices. MAKE says clarity on post-2020 regulatory framework is needed for the offshore wind industry to sustain momentum on cost reductions and growth. Smaller scale growth is expected in the Americas with the US accounting for only 2.2 GW of the global expected grid-connected base in 2023.
MAKE expects Levelised-Cost-of-Electricity from offshore wind (LCOE) to be reduced from the current level of €150/MWh to €110/MWh in 2020, slightly above the €100/MWh target set by several major industry players. By 2025, MAKE forecasts LCOE to be reduced to €84/MWh. As such, offshore wind will be making important progress to approaching grid parity.
MAKE says key levers for offshore wind cost reductions include scaling and industrialization of the offshore wind supply chain, technology improvements related to larger turbines and wind plants, lower- cost substructures, higher technical availability and reduced cabling cost, combined with expected reduced cost of capital, lead time and O&M cost.
MAKE’s "Global Offshore Wind Power 2014" is an 88-page report containing more 150 charts, tables and graphs providing in-depth analysis of the global offshore wind power market. Key topics covered include global, regional, and country-specific market assessments, supply-demand trends for turbine assembly, balance of plant and installation, asset ownership trends and project finance trends.
Related Content
High-tension, vertical filament winding enables affordable flywheel energy storage system
French startup Energiestro’s prototype solar energy flywheel-based storage system aims to reduce costs with glass fiber composites and prestressed concrete.
Read MoreRTM, dry braided fabric enable faster, cost-effective manufacture for hydrokinetic turbine components
Switching from prepreg to RTM led to significant time and cost savings for the manufacture of fiberglass struts and complex carbon fiber composite foils that power ORPC’s RivGen systems.
Read MoreComposite bipolar plates provide 81% improvement to hydrogen fuel cell power density
Ultra-thin CFRTP plates developed by Hycco achieve a 7.5 kilowatt/kilogram power density, high durability for fuel cells in long-flight drone and heavy-mobility applications.
Read MorePolar Technology develops innovative solutions for hydrogen storage
Conformable “Hydrogen in a Box” prototype for compressed gas storage has been tested to 350 and 700 bar, liquid hydrogen storage is being evaluated.
Read MoreRead Next
Ultrasonic welding for in-space manufacturing of CFRTP
Agile Ultrasonics and NASA trial robotic-compatible carbon fiber-reinforced thermoplastic ultrasonic welding technology for space structures.
Read MoreCeramic matrix composites: Faster, cheaper, higher temperature
New players proliferate, increasing CMC materials and manufacturing capacity, novel processes and automation to meet demand for higher part volumes and performance.
Read MoreCutting 100 pounds, certification time for the X-59 nose cone
Swift Engineering used HyperX software to remove 100 pounds from 38-foot graphite/epoxy cored nose cone for X-59 supersonic aircraft.
Read More