CAMX 2018 preview: CoreLite
CoreLite (Miami, FL, US) is featuring its next-generation PC11 Pro coating system for its BALSASUD core series.
CoreLite (Miami, FL, US) is featuring its next-generation PC11 Pro coating system for its BALSASUD core series. The PC11 Pro coating system was engineered to significantly reduce resin uptake during the lamination process by sealing the pores in the end-grain balsa wood sheet more effectively than the standard PC11 coating system. CoreLite says balsa core resin uptake was compared between the standard PC11 formulation and the newly developed PC11 Pro formulation against non-coated balsa. A typical sheet of non-coated balsa wood core will absorb roughly 1900g/m2 of resin during infusion. The standard PC11 formulation was able to reduce the resin uptake by up to 46% to 1020g/m2. The new PC11 Pro formulation is said to reduce resin uptake further, to 450g/m2. This coating, says CoreLite, can be used in wind, marine, rail, automotive, aerospace, defense and industrial applications. It is compatible with hand lay-up, vacuum bagging and infusion. Booth BB10.
Related Content
-
PUR composite sandwich panels for 3D automotive parts, high-volume panels and more
At its U.S. sites, Ascorium produces glass fiber/PUR 3D parts via semi-automated molding, high-volume flat panels via a continuous line while working toward bio-based PUR and recycling.
-
Rock West delivers high-precision composite support tube for particle detection
Large carbon fiber and honeycomb core component, known as the barrel timing layer (BLT) tracker support tube, was delivered to Purdue as part of an upgrade to CERN’s general-purpose proton-proton collision detector for space research.
-
Guidance for the thermoforming process
A briefing on some of the common foam core material types, forming methods and tooling requirements.