Building retrofitted with carbon fiber can survive simulated earthquake
Turkish researchers successfully demonstrated that carbon fiber-based material could prevent the collapse of thousands of buildings during a future major quake.
A team of structural experts from the industry and universities in Turkey have demonstrated in a side-by-side test how a building retrofitted with carbon fiber composites can successfully survive a simulated earthquake. DowAksa, a joint venture between Aksa (Istanbul, Turkey), the world’s leading provider of acrylic fiber, and The Dow Chemical Co. (Midland, Mich.) joined with Istanbul Technical University to conduct a simultaneous full-scale earthquake simulation at a site in Yalova using DowAksa’s carbon fiber reinforced polymer (CFRP) technology. The testing site is near the epicenter of one of Turkey’s deadliest earthquake disasters that in 1999 cost more than 18,000 lives. The team of experts say they were very satisfied by the ability of the upgraded structure to withstand a simulated severe seismic shock, and will review detailed data collected during the test to improve survivability and limit property damage in future earthquakes.
Over the past year, DowAksa constructed two full-scale buildings on land allocated by the Yalova Governor’s Office. Using the same foundation and materials, both buildings were constructed using practices that were common for several decades in Turkish construction, prior to implementation of new requirements under the Earthquake Regulations of 2007. The first building was retrofitted with CFRP and the second building was not changed. The experiment’s goal was to demonstrate how a conventional building can be retrofitted to withstand strong seismic forces.
After several days of final site preparations which included extensive placement of advanced sensors, the test was completed under the supervision of professor Alper İlki from Istanbul Technical University using a system of hydraulic actuators to simulate a seismic shock. This is reportedly the first test in the world of its type to simulate seismic forces on two 3-story structures. According to Professor İlki: “Into my best knowledge, this is one of the largest and exemplary collaborations of industry, academia and the local government in the field of structural and earthquake engineering in Turkey.”
Yalova Deputy Governor Yıldırım Uçar, Mayor of Yalova Municipality Vefa Salman, ITU Professor Mehmet Karaca, AFAD officers and the senior management of DowAksa were on site to witness the final seismic simulation. DowAksa Board Chairman Mehmet Ali Berkman welcomed the other witnesses to the site and thanked Yalova Governorate for their office’s cooperation in providing the test site in Yalova:
“Exactly 17 years, 3 months, 6 days ago, this region we are in now witnessed one of the biggest earthquakes of the last century. Although a long time has passed since that day, many of us remember it like it was yesterday. 18,373 people died, 2,504 of which were from this region of Yalova. 96,796 houses and 15,939 businesses were destroyed. The reason I’m telling all this is to specify the meaning of realizing this project here in Yalova as DowAksa. Yalova where most of our colleagues and their families live. That’s why I would like to express my gratitude to our governor for providing this site to us for the test.”
Berkman added, “Across the globe, aging infrastructure is a growing concern – threatening public safety, causing major disruptions and draining economies. Finding long-lasting and efficient ways to repair buildings, pipelines, roads and bridges is a challenge. We hope that the test we will realize here today to showcase the strength of our product will be a stepping stone in finding a solution to this problem.”
Related Content
Carbon fiber, bionic design achieve peak performance in race-ready production vehicle
Porsche worked with Action Composites to design and manufacture an innovative carbon fiber safety cage option to lightweight one of its series race vehicles, built in a one-shot compression molding process.
Read MorePlant tour: Collins Aerospace, Riverside, Calif., U.S. and Almere, Netherlands
Composite Tier 1’s long history, acquisition of stamped parts pioneer Dutch Thermoplastic Components, advances roadmap for growth in thermoplastic composite parts.
Read MoreWelding is not bonding
Discussion of the issues in our understanding of thermoplastic composite welded structures and certification of the latest materials and welding technologies for future airframes.
Read MorePlant tour: Airbus, Illescas, Spain
Airbus’ Illescas facility, featuring highly automated composites processes for the A350 lower wing cover and one-piece Section 19 fuselage barrels, works toward production ramp-ups and next-generation aircraft.
Read MoreRead Next
Next-gen fan blades: Hybrid twin RTM, printed sensors, laser shock disassembly
MORPHO project demonstrates blade with 20% faster RTM cure cycle, uses AI-based monitoring for improved maintenance/life cycle management and proves laser shock disassembly for recycling.
Read MoreUltrasonic welding for in-space manufacturing of CFRTP
Agile Ultrasonics and NASA trial robotic-compatible carbon fiber-reinforced thermoplastic ultrasonic welding technology for space structures.
Read MoreScaling up, optimizing the flax fiber composite camper
Greenlander’s Sherpa RV cab, which is largely constructed from flax fiber/bio-epoxy sandwich panels, nears commercial production readiness and next-generation scale-up.
Read More