Vartega shows positive results of recycled carbon fiber testing
US-based Vartega Carbon Fiber Recycling has begun characterization of its material, and has received a letter of support from Janicki Industries, which will start to assess the fiber as well.
Vartega Carbon Fiber Recycling LLC (Denver, Colo.) reports that it has collaborated with Steelhead Composites (Golden, Colo.) and SGL Carbon SE (Evanston, Wyo.) to evaluate the tensile strength of carbon fiber recycled by Vartega. Steelhead Composites provided Vartega several rolls of expired towpreg (T700, 12k tow) manufactured by TCR Composites Inc. (Ogden, Utah) for recycling testing. Vartega processed two samples and sent them along with two control samples to SGL for tensile testing according to ASTM D4018.
The results show that the tow material recycled by Vartega has comparable mechanical properties to the virgin control that was tested. Both the control sample and the recycled sample exhibit measured properties consistent with manufacturer’s data. Both samples have favorable tensile strength and minimal measured modulus impacts. In this small sample size, the recycled fiber exhibits properties that are slightly better than the control sample.
| Sample | Sample description | Tensile strength (Mpa) | Modulus (Gpa) | Elongation (strain %) |
| 0 | Manufacturer's data | 4,900 | 230 | 2.10 |
| A | Control (high tension) | 4,510 | 222 | 1.86 |
| B | Control (mfg recommended handling) | 5,066 | 221 | 2.05 |
| 1 | Recycled tow (high tension) | 4,497 | 223 | 1.75 |
| 2 | Recycled tow (mfg recommended handling) | 5,134 | 225 | 2.10 |
Vartega also reports that Janicki Industries (Sedro-Woolley, Wash.) has provided a letter of support to Vartega in regards to Vartega's efforts to commercialize its solvolysis recycling technology.
Per the letter, Vartega has committed to provide Janicki with recycled carbon fiber for evaluation in limited cycle mold masters and backup structures. Janicki plans to use this fiber to process test panels via infusion and evaluate its properties for permeability, thermal expansion, dimensional stability, and machinability.
“The composites industry is faced with a growing waste issue that companies such as ours are eager to address... Janicki is excited to see the research being done by Vartega, and others, to repurpose and recycle this scrap material for second life applications, and reduce the carbon footprint associated with carbon fiber manufacturing," says Andy Bridge, vice president industrial markets, Janicki Industries.
“We’re looking forward to working with Janicki to demonstrate the capabilities of recycled carbon fiber in real-world applications," says Andrew Maxey, president of Vartega Carbon Fiber Recycling. "Aside from its obvious uses in cars and planes, recycled carbon fiber has the potential to significantly reduce the economic and environmental cost of composite tooling.”
Related Content
-
Recycling hydrogen tanks to produce automotive structural components
Voith Composites and partners develop recycling solutions for hydrogen storage tanks and manufacturing methods to produce automotive parts from the recycled materials.
-
DITF oriented rCF tapes target virgin fiber CFRP substitution
Infinity project developed highly oriented rCF/PA6 tapes with 88% the tensile strength, modulus of a virgin CFRP product and 49-66% reduction in global warming potential.
-
Partners recycle A350 composite production waste into adjustable-length rods for MFFD
Herone, Spiral RTC, Teijin Carbon Europe and Collins Aerospace Almere recycle A350 thermoplastic composite clips/cleats waste into rods for the all-thermoplastic composite Multifunctional Fuselage Demonstrator’s crown.