ÂÌñÏ×ÆÞ

I know it’s only April, but in the magazine business, we’re always looking ahead. About this time each year, I start thinking seriously about the next year. I think about the topics we might cover, the types of articles we might approach differently, technologies that we’ve not visited in a while and emerging technologies we’ve not yet visited, as well as the challenges our readers face that we can help them solve.

All of CT’s editors and contributors do the same, collecting story ideas throughout the year, and when it comes time to plan for the new year, we meet, unearth these ideas, mull them over and discuss them. Our story ideas can come from almost anywhere — a trade show, a paper presentation, a composites fabricator (like you), an article in the popular press, a plant visit, an article from an ancillary industry, a press release, a source from another story, hallway conversation at a conference, etc. Some survive the winnowing process and appear in these pages the following year. Some do not. Last year, CT’s writers and editors sifted through more than 50 story ideas, and you’re now seeing the fruit of that labor. For 2009, I’d like at least some of these ideas to come from you.

Featured Content

Assembling the Multifunctional Fuselage Demonstrator: The final welds READ MORE

Automated Composites Knowledge Center READ MORE

Submit abstract to speak at CW Bonding and Welding Tech Days in April READ MORE

One aspect of composites fabrication that we’ve not heavily covered is process engineering and process management — that is, the hands-on, day-to-day challenge of managing and working with a molding process and machinery to make sure they are doing everything they should be, and doing it well. I’d like us to consider covering such stories more, and that’s where you come in.

As we get ready for 2009, I’d like to know more about some of the on-the-floor molding process and engineering challenges you face every day and every week that you think deserve attention in the pages of CT. Is there some aspect of your RTM process that is always a problem, and you’d like to hear how others solve it? When you troubleshoot a molding process (spray-up, infusion, RTM, etc.), what kinds of challenges do you chronically encounter? Is cutting cycle time your biggest challenge, and do you have a hard time meeting it? Do you have a machine or piece of equipment that is difficult to manage and operate? Is design-for-manufacturing so foreign in your shop that you have to “engineer” around designs? Are there tooling challenges that you think should be explored in CT? Are your scrap rates through the roof and beyond control? If a part is rejected, is there a common cause that you can’t fix?

This is your chance to be heard, and just as there are no dumb questions, in the magazine business there are no dumb ideas. I’m taking any and all comers, and I’ll take them however you want to send them. All of my contact information is below and I strongly encourage you to send me your shop-floor thoughts, ideas, concepts, frustrations, challenges, solutions, complaints, worries, concerns, wishes and cogitations. Vote early and vote often, and I hope to hear from you soon.

Jeff Sloan

Tel: (719) 647-9772

Fax: (719) 647-9773

E-mail: jeff@compositesworld.com