ÂÌñÏׯÞ

Updated Published

UC San Diego earns NASA grant for eVTOL design tool development

Three-year project to develop open-source simulation and optimization tools to enable companies to rapidly design eVTOL vehicle concepts.

Share

An artist’s conception of an urban air mobility environment.

An artist’s conception of an urban air mobility environment. Photo Credit: NASA/Lillian Gipson

Note: This article was provided by the  and originally reported by Katherine Connor.

It was reported on Feb. 12 that a team of engineers led by the University of California (UC) San Diego have received a $5.8 million  to create computational design tools that will help U.S. companies develop more efficient electric vertical takeoff and landing (eVTOL) aircraft designs faster. 

“This project is part of a growing field called urban air mobility (UAM), an exciting vision enabling point-to-point, on-demand air travel within densely populated areas,” says John Hwang, professor of mechanical and aerospace engineering at the Jacobs School of Engineering at UC San Diego and principal investigator for the project. “We will combine multidisciplinary computational models of UAM vehicles and advanced design optimization algorithms to develop methods and tools for rapidly designing safe, quiet and affordable vehicle concepts.”

This three-year project will result in a set of open-source simulation and optimization tools that companies can use to design the optimal eVTOL aircraft according to needs and requirements. Given several input parameters such as number of passengers, desired cruise speed and range requirement, these tools will reportedly allow engineers to determine the optimal number and shape of rotors, wing shape, structural design, propulsion system sizing and other design aspects that yield the most cost-efficient vehicle while ensuring it is safe and operates quietly. In addition, the researchers will use these tools to perform vehicle configuration trade studies on safety, noise and cost, to help companies make design decisions.

“Given a computational model, state-of-the-art design optimization algorithms can efficiently search for the optimal values of up to tens of thousands of design parameters that minimize or maximize some specified objective, such as vehicle operating cost,” adds Hwang. “We will develop models for all aspects of the aircraft — such as aerodynamics, structures, acoustics, battery and motor performance —  and leverage these optimization algorithms to navigate the most complex and unintuitive aspects of the eVTOL aircraft design problem.”

Early rollout of this new class of vehicles is expected within five years, with a market study commissioned by NASA estimating these services will be profitable by the 2030s. In fact, United Airlines and startup Archer Aviation (Palo Alto, Calif., U.S.) recently signed a deal to purchase 200 of these eVTOL aircraft, expected to debut in 2024.

The team, led by Hwang, is one of  award from NASA. ULI was created to initiate a new type of interaction between NASA’s Aeronautics Research Mission Directorate and U.S. universities, with academic researchers taking the lead on their own research projects that further NASA’s mission.

In addition to Hwang, the team includes UC San Diego engineers David Kamensky, Alicia Kim and Shirley Meng. The team also includes Seongkyu Lee from UC Davis; Chris Mi from San Diego State University; Andrew Ning from Brigham Young University; Jeffrey Chambers and Adam Grasch from Aurora Flight Sciences (Manassas, Va., U.S.); and Tyler Winter of M4 Engineering (Long Beach, Calif., U.S.). In all, the researchers bring expertise in computational modeling and optimization, topology optimization, batteries, acoustics, electric motors, aerodynamics, composite materials and concept design.

Key aspects of the ULI include a focus on transitioning the research results to industry or government partners to bring them to market; providing research opportunities for students; and promoting greater diversity in the aeronautics field through increased participation of underrepresented groups in engineering.

This project will have an industry advisory board consisting of both established aircraft companies and eVTOL startups. The team will also institute an aeronautics internship program for students, to enhance and coordinate recruiting and mentoring of undergraduate student researchers across all four universities involved. The internship will be run in partnership with the Academic Enrichment Program at UC San Diego, which has experience managing internship programs for first-generation, low-income and underrepresented students in engineering.

CW Tech Days: High-Temp Composite Solutions

Related Content

Vertical Aerospace eVTOL prototype goes down during uncrewed test flight

The U.K. company has confirmed the Aug. 9 accident that resulted in significant aircraft damage and potential setbacks.

Read More
Market Outlook

Composites end markets: Pressure vessels (2024)

The market for pressure vessels used to store zero-emission fuels is rapidly growing, with ongoing developments and commercialization of Type 3, 4 and 5 tanks.  

Read More

Prepreg compression molding supports higher-rate propeller manufacturing

To meet increasing UAV market demands, Mejzlik Propellers has added a higher-rate compression molding line to its custom CFRP propeller capabilities.  

Read More
Pressure Vessels

ECOHYDRO project to enable recyclable composites for hydrogen storage

With the involvement of two schools from the Institut Mines-Télécom, the 4-year project aims to improve the intrinsic properties of a composite material based on Elium via four concrete demonstrators.

Read More

Read Next

Archer to be listed on NYSE through Atlas Crest Investment merger

Business combination agreement expected to provide approximately $1.1 billion of gross proceeds. United Airlines to purchase $1 billion worth of Archer’s eVTOL aircraft.

Read More
Prepregs

Solvay, Vertical Aerospace expand on UAM agreement

Composite materials supplier Solvay Composite Materials and urban air mobility (UAM) manufacturer Vertical Aerospace offer details about materials, process use in VA-1X aircraft.

Read More
Compression Molding

VIDEO: High-volume processing for fiberglass components

Cannon Ergos, a company specializing in high-ton presses and equipment for composites fabrication and plastics processing, displayed automotive and industrial components at CAMX 2024.

Read More