ÂÌñÏ×ÆÞ

Earlier this year, we connected with composites veteran Rob Sjostedt, CEO of VectorSum Inc. (Irvine, CA, US) and a former associate of legendary composites innovator Brandt Goldsworthy of Goldsworthy Engineering (Torrance, CA). Rob wrote a CW: Past, Present & Future column for us in the April issue. There, he talked about the composites fabrication technologies that were developed at Goldsworthy Engineering — some of which have panned out and some of which haven’t. Among the winners, Rob mentioned automated tape laying (ATL).

This  got me to wondering about the history of fiber and tape placement. Which came first, and when? It seemed likely to me that tape laying preceded fiber placement, but what was its genesis? Where and when was the first ATL conceived?

Featured Content

Biomaterials make strides toward composites sustainability READ MORE

Composites end markets: Sports and recreation (2025) READ MORE

Automated Composites Knowledge Center READ MORE

This sent me to our senior writer emeritus, Donna Dawson, who spent more than 20 years working with Brandt Goldsworthy and had a front-row seat for many of his company’s technological developments. She dug through her voluminous notes and records and suggested I try to find a 1969 (!) SAMPE paper, authored by Goldsworthy engineering sales manager Ethridge “E.E.” Hardesty, titled, “Advanced Composite, High-Modulus Tape Placement Machines.” Off to SAMPE I went, where a very helpful Robert Garcia dug up the paper for me. It was presented at the SAMPE 15^th National Conference in Los Angeles. 

Hardesty’s paper is remarkable for a couple of reasons. First, it outlines not what was being done to develop ATL, but what must be done. Second, it presents a well-crafted snapshot of what was then the state of the industry’s art. Hardesty notes, for example, “With the advent of company-sponsored — often with Air Force assistance — flightworthy and flight-tested structures, it is immediately evident that filament and tape placement techniques and processes thus far developed, mostly involving hand layup methods, are now in need of being transposed into First Generation production machines.”

Hardesty goes on to describe his (and, presumably, Goldsworthy’s) vision of the first three generations of tape placement machines, which he predicted would evolve through 1974. The first-generation machine would place 3-inch wide tape with a gantry-type machine, with distances dialed-in with digital thumbwheels. The second-generation machine, owing to the need to place fiber on compound curvatures, would apply 3-inch tape slit into 24 1/8-inch tows, with X-Y, X-Z and Y-Z movement capabilities. The third-generation machine would be able to reach into “any spot on any surface and begin laying tape, progress in any direction over that surface and terminate its applied tape band at any other spot on the surface. All automatically.”

So, what happened? Well, Hardesty’s prescription was not just a well-calculated shot in the dark. Indeed, on Nov. 27, 1973, the US Patent Office issued to Harald Karlson and Ethridge Hardesty, both of Goldsworthy Engineering Inc., patent number 3,775,219 for a “Composite-Tape Placement Head.” It would, according to the patent, comprise “an integrally complete composite-tape placement head for direct attachment to a host gantry type of machine, which tape placement head is designed to precisely apply preimpregnated fiber reinforced tape to a work piece.”

The patent focuses primarily on the tape placement head, its design and features, including “tape forwarding, tape-placement, backing-film retrieval, and tape cut-off mechanical and drive functions.” It suggests the use of several fiber types — “fiberglass, lithium, boron, quartz or grown whisker crystals, etc.” — but not carbon fiber. It also suggests the use of several resin systems, including polypropylene, polycarbonate and polyester, as well as phenolics and epoxies.

Thus, it appears, automated tape placement was launched. If only Mssrs. Goldsworthy, Karlson and Hardesty could see, today, what’s become of the technology they created.