Inside the MFFD — CW's coverage of the Clean Aviation multifunctional fuselage demonstrator
ÂÌñÏ×ÆÞ rounds up coverage of the MFFD project over the past decade. Now complete, the MFFD illustrates numerous processes and technologies for manufacturing primary aerospace structures using thermoplastic composites.
The thermoplastic composite multifunctional fuselage demonstrator (MFFD) produced using multiple welding technologies. Source | Airbus
Clean Aviation’s (formerly Clean Sky 2’s) Multifunctional Fuselage Demonstrator (MFFD) project has spanned 10 years and produced one of the largest aircraft structures fabricated from thermoplastic composites (TPC). The MFFD is an 8 × 4-meter-diameter fuselage section that demonstrates numerous composites manufacturing technologies including “dustless assembly”via conduction welding, continuous ultrasonic welding and resistance welding. One of the project’s goals is to explore alternatives to the multistep process chain, labor, time, cost and weight of drilling holes and installing fasteners in composite primary structures. It also seeks to advance the maturity of thermoplastic processes that promise high-rate production and more sustainable manufacturing that can re-use production waste.
CW has reported on the MFFD for years via multiple articles, most recently offering an extensive look at the final assembly for the project.
Read more:
Proving out LMPAEK welding for Multifunctional Fuselage Demonstrator
Clean Sky 2 STUNNING project manufactures lower thermoplastic fuselage while MECATESTERS tests LMPAEK in conduction and induction welding for parameters, cyclic loading, aging and environmental effects.
Moving forward on the Multifunctional Fuselage Demonstrator (MFFD)
Clean Sky 2’s MFFD program continues to move toward its goal of delivering a welded, thermoplastic composite fuselage demonstrator using next-generation manufacturing processes.
Manufacturing the upper half of the Multifunctional Fuselage Demonstrator (MFFD)
Proving industrial reliability for low-cost thermoplastic composites production using AFP in situ consolidation, as well as continuous ultrasonic and resistance welding.
Thermoplastic composites welding advances for more sustainable airframes
Multiple demonstrators help various welding technologies approach TRL 6 in the quest for lighter weight, lower cost.
Thermoplastic composites welding: Process control, certification, crack arresters and surface prep
Ongoing developments in the push for more widespread use of welded composite structures.
MFFD thermoplastic floor beams — OOA consolidation for next-gen TPC aerostructures
GKN Fokker and Mikrosam develop AFP for the Multifunctional Fuselage Demonstrator’s floor beams and OOA consolidation of 6-meter spars for TPC rudders, elevators and tails.
Manufacturing the MFFD thermoplastic composite fuselage
Demonstrator’s upper, lower shells and assembly prove materials and new processes for lighter, cheaper and more sustainable high-rate future aircraft.
Assembling the Multifunctional Fuselage Demonstrator: The final welds
Building the all-thermoplastic composite fuselage demonstrator comes to an end with continuous ultrasonic welding of the RH longitudinal fuselage joint and resistance welding for coupling of the fuselage frames across the upper and lower halves.
Related Content
-
Plant tour: Airbus, Illescas, Spain
Airbus’ Illescas facility, featuring highly automated composites processes for the A350 lower wing cover and one-piece Section 19 fuselage barrels, works toward production ramp-ups and next-generation aircraft.
-
The potential for thermoplastic composite nacelles
Collins Aerospace draws on global team, decades of experience to demonstrate large, curved AFP and welded structures for the next generation of aircraft.
-
Sulapac introduces Sulapac Flow 1.7 to replace PLA, ABS and PP in FDM, FGF
Available as filament and granules for extrusion, new wood composite matches properties yet is compostable, eliminates microplastics and reduces carbon footprint.