AOC Showroom

AOC opens Italy pilot plant, increases product innovation speed

AOC has strengthened its composite resin capabilities through significant investment in a new pilot plant at its Filago operations, anticipating better product development support, commercialization for customers.

Composites end markets: Sports and recreation (2025)

The use of composite materials in high-performance sporting goods continues to grow, with new advancements including thermoplastic and sustainability-focused materials and automated processes.

AOC resins support SMC composite doors for air raid shelters

The recent use case exemplifies the application of AOC’s SMC resins in related fields, thanks to their strength, resistance and longer lifespan in comparison to metal or fiber-reinforced concrete options.

AOC presents complete range of rPET-based resin formulations

Czech Republic facility takes post-consumer waste and converts it into high-quality formulations, such as the Synolite 4600 and 1112-G series, for composites manufacturing.

AOC rPET resins enable Quantum Mouldings composite pop-top camper van roofs

Feedstock-based resin formulations and high-quality Büfa gelcoats support flexible, durable and more sustainable automotive part processing.

AOC facility renovations strengthens U.K. composites backing

Since the purchase of its Haverhill facility in 2022, AOC’s team has been upgrading equipment, processes and layout, in addition to building its certifications, to enhance its industry support.

AOC and partners achieve styrene-free composite RV roof

Indupol, Büfa and AOC brought their materials and fabrication know-how to yield a styrene-free gelcoat and RTM formulation for the manufacture of luxury vehicle roofs.

AOC, Büfa Composites expands partnership network to Sweden

Composites and resins portfolios are now available to the Scandinavian market through Büfa Composites Nordics Oy.

Optiplan automotive sandwich panels optimized via AOC rPET resin series

Incorporation of AOC’s Synolite rPET resins into FRP cover sheets enables the development of more eco-friendly truck construction.

AOC, Büfa expand distribution partnership

Through newly formed Büfa Composites Austria, customers in southeast Europe will have access to resins, gelcoats and auxillary materials.

Classic Citroën vans reimagined using composites, AOC resins

Caselani Srl, with support from AOC Resins and designer David Obendorfer, retrofits close to 400 vans/year to meet modern needs and comfort for Type H car enthusiasts.

Saertex expands production range with pultruded planks for rotor blades

SAERplanks pultruded profiles, opening new avenues in the wind industry, comprise heavy-tow carbon fibers produced using a novel hybrid resin system for reliable performance, high productivity and minimum scrap rates.

AOC, Zoltek, Astar develop novel CF-SMC for high-performance automotive parts on an industrial scale

The combination of Zoltek’s low-cost split-tow fiber and Daron SMC resin from AOC and Astar produces CF-SMC with enhanced mechanical properties, low part emissions, cost efficiency and design freedom.

Lone Star completes acquisition of AOC

AOC, a global manufacturer of unsaturated polyester resins, vinyl ester resins and other solutions, will continue to operate under the AOC name, with management of facilities in North America, Europe and Asia.

AOC announces ISO 9001 recertification for EMEA sites

International standard serves the company’s objective to continuously improve customer satisfaction and meet product requirements.

People in Composites: May 2021

Illium Composites, Boom Supersonic, Hexion, AOC, KraussMaffei, Composites Integration and SPE announce new hires within the composites manufacturing industry.

TU Delft Nuna11 integrates composites for Bridgestone World Solar Challenge

In preparation for the 2023 solar-powered car race, the Vattenfall Solar Team is optimizing vehicle weight with AOC styrene-free resins for the Nuna11’s structure and shell.

AOC finalizes acquisition for Czech Republic UPR manufacturing operation

The plant will further improve service and logistics to AOC Central/Eastern Europe customers and make new products, including manufacturing green resins based on recycled PET.

AOC acquires Czech Republic UPR manufacturing operations

The acquisition enables AOC to significantly extend its manufacturing footprint, and further adds to the company’s global presence.

BÜFA Composite Systems acquires AOC Ltd. from AOC Aliancys

Effective March 3, 2020, AOC Ltd. will operate under the name BÜFA Composites UK.

Composites restore drinking water in historic Amsterdam

A fiberglass-reinforced liner helped resurrect a corroded waterline pipe.

AOC and Aliancys join forces

The two companies have merged to form a new global supplier of polyester and vinyl ester resins, gel coats and materials for the composites industry.

AOC to be acquired by CVC Capital Partners

AOC, global producer of resin chemistries for composites, has signed a definitive agreement with CVC Capital Partners to be acquired.

JEC World 2018 preview: Aliancys

At the upcoming JEC World 2018 trade show, Aliancys (Schaffhausen, Switzerland) will be presenting several new product innovations.

Composites give shape to new passenger bus

The VDL Bus & Coach Citea bus features composite structures fabricated using a vacuum expansion process (VEX) with specially formulated foaming resin compounds supplied by BÜFA Composite Systems.

Composite in Netherlands tunnel firewater system

The A2 motorway used to run through Maastricht. Now it runs under it. Composite piping helps make sure the tunnel’s firewater system is always ready.

Aliancys launches Neomould tooling resin

Aliancys (Schaffhausen, Switzerland) has introduced its new Neomould 2017-S-1 resin for manufacturing composite tooling.

Composites in high-speed marine

Italy-based FB Design’s high-speed boat sets a record on the Montecarlo-Roccella Jonica-Venice sea track.

SMC 4.0

The story behind the supplier-orchestrated effort that eliminated unacceptable defects levels in painted Class A SMC exterior auto parts.

SMC is on the upswing (and check out this design competition)

There’s a lot going on with sheet molding compound (SMC) right now, including a design competition for best SMC design, with the winner announced at Composites Europe.

Composites in Class A body panels: Evolution continues

Low-density SMCs lead the way as fiber-reinforced polymers make headway in auto components that must please the eye.

Composite tanks best stainless steel over road, rail and sea

One-piece, filament wound containers cost less, hold more, last longer.

Composites in a very large gate

The Wilhelmina Canal in Northern Europe is getting a major upgrade from massive (6.2m by 12.9m), lightweight (24 MT) composite doors that are designed for up to 80 years of continuous in-water service.

Fine-tuning fiberglass: Smart fiber sizing

Some insights into those proprietary chemistries that can customize performance at the fiber/resin interface.

JEC World 2016, the full report

��ñ��'s editors report on the technologies and products that caught our eye at JEC World 2016, in early March.

Bioresins: Not a tsunami, but more like a rising tide

This excerpt from an upcoming article in CW magazine shows that a lot of investigation is happening, and some promising applications are developing.

Smart Lightweighting at ACCE

I’m in Detroit, at the 2015 Society of Plastics Engineers’ (SPE) Automotive Composites Conference and Exhibition (ACCE), co-chaired by our contributor Dale Brosius and organized by our contributor Peggy Malnati. And I’m seeing real composite cars, and real, in-production composite parts.

Autocomposites Update: Engine oil pans

As thermoplastic composites makes inroads into these complex, modular parts, weight and cost go down, functionality goes up.

2014 JEC Europe Review

The composites world met again in Paris, vibrant, stronger, and more forward-looking than ever before.

Styrene & cobalt: Headed for the exit?

Fair or not, styrene and cobalt are now considered harmful to humans. Here's an update on the impact this issue poses for the composites industry and what resin and additive manufacturers are doing about it.

2013 JEC Europe new product showcase

The JEC Europe 2013 trade show (March 12-14, at the Paris Expo, Porte de Versailles, Paris, France) was the venue for introductions of a large number of new composite materials, technologies and manufacturing processes. Here's the HPC editorial staff's compilation of what was on display.

JEC Europe 2013 review

Snow in Paris slowed traffic to the show floor but did nothing to cool the enthusiasm of composites innovators in a broad range of markets.

JEC Europe 2013 new product showcase

The JEC Europe 2013 trade show (March 12-14, at the Paris Expo, Porte de Versailles, Paris, France) was the venue for introductions of a large number of new composite materials, technologies and manufacturing processes. Here's the CT editorial staff's compilation of what was on display.

SAMPE Europe 2013/JEC Europe 2013 highlights

Held concurrently, these two seminal European composites events weathered a rare Parisian snowstorm to plumb the depth and breadth of the industry.

JEC 2013 at first blush

CT Editor-in-chief Jeff Sloan risks some immediate reactions to his week in Paris at the JEC Europe 2013 composites trade show.

Cured in place pipe: Trenchless trends

A variety of CIPP products are enabling the rehabilitation, rather than excavation and replacement, of underground pipe for wastewater and drinking water.

Big museum, big structures

Massive aramid/carbon composite sandwich panels make Amsterdam’s Stedelijk Museum the largest composite-clad building in the world.

2012 JEC Europe Highlights

JEC’s annual Paris exhibition reports impressive attendance figures as exhibitors tout big news.

Formulation flexibility: Direct-SMC

Consortium applies inline-compounding technology to reinvent sheet molding compound.

JEC Composites 2009 showcase

Despite the doleful state of the global economy, the turnout in Paris — exhibitors and visitors — proved surprisingly strong.

Resin systems update: The greening of thermosets

Thermoset resin formulators seek environmental benefits as customers demand reduced cost and increased performance.

Low-cost methods realize high-concept Superbus

Multifunctional mass-transport vehicle concept takes shape via resin-infused carbon/epoxy and vacuum-formed glass-reinforced thermoplastic sandwich construction.

Composites ride and support the rails

Increased ridership and heavier axle loads on rail systems around the world signal a potential boon for composites.

Wind Blade Manufacturing: Are thermoplastic composites the future?

In a market dominated by thermoset composites, some wind turbine blade manufacturers are actively pursuing new composite blade designs featuring faster-processing reinforced thermoplastics.

Building Bridges to Bridge and Building Rehab Markets

Despite a lack of standardization and education in the civil construction sector, these innovators use carbon and steel fibers to reinforce the business case for composites.

A faster, more stable Olympic dinghy

The 470-class dinghy, a small, two-person monohulled racing craft, has been used in Olympic sailing competition since 1976 and, today, vacuum-infused glass fiber/polyester is the standard for hull construction. Designers of the dinghy that will be used by Marcelien De Koning and Lobke Berkhout, members of the Dutch

Inside Manufacturing: CIPP Lights Way in Buried Pipe Repair

Spiral-wound, UV-curable fiberglass CIPP bests competitors and bears loads in “trenchless” wastewater pipe rehabilitation project.

JEC Composites 2007 Product Showcase

This year’s Parisian exhibition provides key evidence of the composites industry’s unprecedented breadth and technical sophistication.

JEC COMPOSITES 2007 Highlights

Advanced composites make notable marks not only in traditional aerospace apps, but in automotive, sport and infrastructure arenas as well.

Distributors in the composites industry

More than "middlemen," they play a key role in successful projects for many fabricators.

New thermoplastic composite reduces part cost for automotive airbag assembly

In the auto industry, changes in manufacturing processes are difficult. Material certification processes can be long and expensive, especially for parts designed to comply with government safety regulations. But when Quadrant CMS (Tielt, Belgium) recently introduced a thermoplastic composite that dramatically reduced

Subsea Wellhead And Pipeline Protection Covers

Wellhead and pipeline protection covers are required under the Norsok regulations for subsea installations in the Norwegian sector (Standard U-002, Subsea Structures and Piping System). Traditional steel wellhead covers are very large — often more than 50 ft/15m square — to allow ROVs access to the Christmas t

��ñ����

AOC

AOC AOG

About AOC

IS THIS YOUR COMPANY?

As Seen On ��ñ����

Trade Names Offered by AOC

Editorial, News, and Products