DumoLab's biodegradable arch enables biocomposite concrete alternatives
Terrene 3.0 is a compression-dominant arch developed as a multidisciplinary research project composed of natural fiber-reinforced sand and other biomaterials that delivers eco-friendly, less energy-intensive building methods.
Terrene 3.0 Biodegradable Earthen Composite Arch by DumoLab Research.Terrene 3.0 Biodegradable Earthen Composite Arch by DumoLab Research.
In order to mitigate the greenhouse gas (GHG) emissions contributed by modern building practices — the use of glass, steel and cement, for example, are the cause of 11% of global emissions — a team of researchers from at the University of Pennsylvania’s (Philadelphia) Stuart Weitzman School of Design, with collaborators from the Polyhedral Structures Lab and Complex Fluids Lab, developed the , a biocomposite concrete alternative for architectural applications.
Taking from more natural, less energy-intensive resources, Terrene 3.0 explores the enhancement of lightweight, bio-based earthen construction in a wide leg arch by combining structural and material optimization methods. It is composed of ChitoSand — a thin bilayer of sand augmented with chopped flax fiber, citric acid as a plasticizer and bound by chitosan biopolymer — and underlaid by a sewn burlap fabric base layer. The fiber reinforcement provides the arch with increased tensile strength, the citric acid stability, and the burlap confers additional bending stability. Together, according to an article submitted on the project, the structure “offers concrete-like strength when employed in a structure and nutrients back to the soil when degraded,” achieving minimal waste during fabrication.
Future work is underway to enhance water resistance, increase scale and explore other material options to enable a more permanent earthen tension-compression pavilion.
“At DumoLab, we use simple materials and ambient conditions manufacturing to assemble structures closer to nature’s way and with properties competitive with other unsustainable practices,” says , director of DumoLab Research and assistant professor of architecture at the University of Pennsylvania.
Mogas-Soldevila has also been a part of the Water-Based Digital Fabrication project that CW reported on in 2021. The MIT project developed and patented a novel robotic deposition system using water-based solutions of bio-polymers like chitin and cellulose to create tailored biocomposite structures.
For more information about DumoLab, .
Related Content
-
Plant tour: Airbus, Illescas, Spain
Airbus’ Illescas facility, featuring highly automated composites processes for the A350 lower wing cover and one-piece Section 19 fuselage barrels, works toward production ramp-ups and next-generation aircraft.
-
Otto Aviation launches Phantom 3500 business jet with all-composite airframe from Leonardo
Promising 60% less fuel burn and 90% less emissions using SAF, the super-laminar flow design with windowless fuselage will be built using RTM in Florida facility with certification slated for 2030.
-
Hybrid process marries continuous, discontinuous composites design
9T Labs and Purdue applied Additive Fusion Technology to engineer a performance- and cost-competitive aircraft bin pin bracket made from compression-molded continuous and discontinuous CFRTP.
