Bio-based composite Skaw A foiling scow yacht is built with Greenpoxy resins
Sicomin has partnered with Skaw Sailing and Shoreteam to deliver a foiling yacht design for cruising that embodies durability and performance with a low environmental impact.
The Scaw (A). Source | Sicomin
A collaboration between Sicomin (Châteauneuf les Martigues, France), (Lorient, France) and composite boatbuilder (Colombelles, France) has resulted in the development of the Skaw (A) foiling cruising yacht. Built by Shoreteam and designed by Benoit Marie and Clément Bercault, the monohull scow brings together a high-performance foiling design with reduced environmental impact through the use of sustainable resins.
The Skaw (A) is claimed to represent the first-ever foiling cruising scow yacht, crafted for optimal speed, maneuverability and eco-responsibility. It is constructed using Sicomin’s high-modulus GreenPoxy resin solutions, including SR InfuGreen 171 for the infusion of larger parts and SR GreenPoxy 170 for hand laminating and bonding the secondary structures. Both resins provide the strength, durability and quality essential for a high-performance yacht design and enable Shoreteam to achieve an ultra-lightweight 5,000-kilogram displacement and high mechanical performance necessary to achieve foiling.
According to Benoit Marie, founder of Scaw Sailing, the goal was for a yacht design that embodies exceptional performance and environmental responsibility. “Our SR InfuGreen 171 and SR GreenPoxy 170 were an ideal fit for this ambitious project,” adds Tom Kerriou, Sicomin. “We are excited to see our sustainable GreenPoxy epoxy solutions contribute to the success of this design and we look forward to supporting Skaw Sailing and Shoreteam in bringing this yacht to life.”
Related Content
-
From the CW Archives: Airbus A400M cargo door
The inaugural CW From the Archives revisits Sara Black’s 2007 story on out-of-autoclave infusion used to fabricate the massive composite upper cargo door for the Airbus A400M military airlifter.
-
Composites manufacturing for general aviation aircraft
General aviation, certified and experimental, has increasingly embraced composites over the decades, a path further driven by leveraged innovation in materials and processes and the evolving AAM market.
-
MFFD longitudinal seams welded, world's largest CFRTP fuselage successfully completed
Fraunhofer IFAM and partners have completed left and right welds connecting the upper and lower fuselage halves and sent the 8×4-meter full-scale section to ZAL for integration with a cabin crown module and testing.