Processes
Composites Air Cans Lighten Riser Loads
Low-pressure air cans, designed to add buoyancy to a spar platform’s riser string, are good candidates for composite materials. Up to 12 ft/3.7m in diameter and from 30 to 60 ft/9.2 to 18.5m long, the hollow structures support the riser weight and take load off of the platform’s hull. Typically installed insid
Read MoreAll-Composite Platforms?
Gibson describes how a team representing the Centre for Composite Materials Engineering, MSP (formerly Maunsell Structural Plastics, Beckenham, Kent, U.K.) and Odebrecht Oil and Gas, a Brazilian-owned platform fabrication company, were tasked with redesigning the topside of BP’s small, minimum-facility Davy-Be
Read More
Design Issues With Tendons
A composite tendon is essentially a rope made from small-diameter rods, which are pultruded with carbon fiber. Multiple rods are gathered together and twisted slightly to form a strand, using typical wire rope stranding methods. Depending on the performance requirements, 10 to 40 strands, about 2 to 3 inches/5
Read More
Design Issues
Typical FRP pipe is reciprocally filament wound with a fiber angle of ±54.75° relative to the longitudinal (0°) axis. This architecture satisfies stress loads in both the circumferential (hoop) and longitudinal (axial) directions for most pipes and pressure vessels. It withstands the in-use pressure, ther
Read MoreSome Design Issues
A variety of resins can be used for offshore applications, depending on the requirements for the final product. General-purpose polyester offers a low-cost option that provides greater corrosion resistance than steel. Isophthalic polyester provides somewhat better corrosion resistance, while vinyl ester is pre
Read MoreSubsea Wellhead And Pipeline Protection Covers
Wellhead and pipeline protection covers are required under the Norsok regulations for subsea installations in the Norwegian sector (Standard U-002, Subsea Structures and Piping System). Traditional steel wellhead covers are very large — often more than 50 ft/15m square — to allow ROVs access to the Christmas t
Read MoreComposite Trusses For Large Structures?
Ebert Composites Corp. (Chula Vista, Calif., U.S.A.) is marketing a composite truss concept for large structures that has potential for offshore application. Since 1992, the company has focused on the development of large, all-composite lattice-type power transmission towers to replace galvanized steel towers.
Read MoreDownhole Composites Boost Durability, Drillability
Halliburton Energy Services, Schlumberger Oilfield Services, Weatherford International, and Baker Oil Tools, all based in Houston, Texas (U.S.A.), offer composite downhole tools — made with both thermoplastics and thermoset resins — for a variety of applications. Halliburton’s FasDrill packers and plugs
Read More