Hyperbaric chamber: Portable, pliable FRP handles pressure
Groupe Médical Gaumond Inc. (GMG, Terrebonne, Quebec, Canada) premieres HematoCare, its portable, collapsible composite hyperbaric chamber.
Hyperbaric Oxygen Therapy (HBOT) is recognized by Health Canada (Ottawa, Ontario), the U.S. Food and Drug Admin. (FDA, Washington D.C.) and European health agencies as an effective treatment for more than a dozen medical conditions, including carbon monoxide poisoning and decompression sickness. Patients are placed inside a hyperbaric chamber pressurized to greater than 1 bar/14.5 psi, where they breathe 100 percent oxygen through a mask or hood. These rigid, multiplace chambers (they accommodate multiple patients) weigh around 1,500 kg/3,307 lb. Although there is a market for portable, single-place chambers, the “soft” (collapsible) vessels they would require, until recently, could not sustain pressures high enough for HBOT. Groupe Médical Gaumond Inc. (GMG, Terrebonne, Quebec, Canada) has changed that.
GMG’s HematoCare hyperbaric chamber comprises three composite parts: a control station, a transport case that doubles as the chamber base, and a unique flexible pressure vessel. The vessel is filament wound with Kevlar aramid fiber (DuPont Protection Solutions, Richmond, Va.) impregnated by a specially developed resin that provides flame resistance and strength sufficient to meet pressure loads. It’s rated at 3 ATA (absolute atmosphere) or 29.4 psig/2.0 bar, but has a Shore A hardness of only 25 — softer than a gel-type shoe insole. As a result, the vessel can be folded in on itself (see photo immediately below), yet has withstood 9.31 bar/135 psi during burst testing. Assembled, HematoCare is 2.5m/8.2 ft long with a maximum diameter of 1.1m/3.6 ft, but it collapses to 0.7m/2.3 ft long — compact enough for transport via crossover utility vehicle (see bottom photos). Not surprisingly, GMG has patented multiple aspects of the HematoCare, including the innovative fire retardant used in the vessel membrane.
Determining the optimum winding angles and pattern was the key to its pliability and dimensional stability. In fact, the composite’s high strength-to-weight ratio helped GMG match the performance of steel and acrylic hard chambers, yet at 125 kg/276 lb, it’s roughly one-eighth the weight of the lightest HBOT-approved rigid vessels.
A 2014 JEC Innovation Award winner in the medical category, HematoCare is targeted not only to medical care facilities, but diving centers and professional sports team facilities as well.
Related Content
-
ECOHYDRO project to enable recyclable composites for hydrogen storage
With the involvement of two schools from the Institut Mines-Télécom, the 4-year project aims to improve the intrinsic properties of a composite material based on Elium via four concrete demonstrators.
-
The next evolution in AFP
Automated fiber placement develops into more compact, flexible, modular and digitized systems with multi-material and process capabilities.
-
Plant tour: Hexagon Purus, Kassel, Germany
Fully automated, Industry 4.0 line for hydrogen pressure vessels advances efficiency and versatility in small footprint for next-gen, sustainable composites production.