Wind energy gains expected after tax credit extension
Could usher in a new wave of turbine installations in the U.S.
The wind energy industry is applauding a multi-year extension of the wind energy Production Tax Credit (PTC) that Congress recently passed.
“We’re going to keep this American wind power success story going,” said Tom Kiernan, CEO of the American Wind Energy Association (AWEA). “With predictable policies now in place, we will continue advancing wind turbine technology, driving down our costs and passing the savings on to American families and businesses in all corners of the country. We look forward to building a future with more affordable, reliable, clean wind energy.”
The U.S. House of Representatives voted to approve the 2016 spending package. The U.S. Senate followed with suit. As a result, the wind energy PTC and alternative ITC will now be extended for 2015 and 2016, and continue at 80 percent of present value in 2017, 60 percent in 2018, and 40 percent in 2019. As before, the rules will allow wind projects to qualify so long as they start construction before the end of the period.
Industry leaders and others reacted to the news favorably, saying the multi-year extension supplies their companies with a level of predictability needed to keep U.S. factories open while adding new wind projects to the pipeline:
“Pattern will be expanding its project development for the coming year because of the PTC extension. Having PTCs for five years will allow us to make more supply commitments and build more projects, creating more jobs. It also allows us to work with the turbine vendors to lower the cost of our projects and minimize the economic impact of phasing down of the credits,” Mike Garland, CEO of Pattern Energy and Chairman of the Board for AWEA.
“On behalf of the nearly 2,000 Siemens wind energy employees in the U.S., I applaud Congress for its leadership in providing clear, long-term certainty for renewable energy growth in America. The PTC has encouraged tremendous investment in wind energy, helping to reduce the cost of wind power while simultaneously creating a new American industry. This extension will bolster the continued growth of domestic wind energy and the jobs this growing industry supports, allowing our factories to plan for the future as we continue to deliver innovation that drives down the cost of wind power,” Jacob Andersen, CEO, Siemens Onshore Americas.
The PTC has helped spur innovation in wind turbine technology, causing wind’s costs to fall 66 percent in just six years. The multi-year predictability will help continue that trend and break the repeated boom-bust cycles the U.S. wind energy industry has weathered through two decades of uncertain tax policies, according to the AWEA.
In 2013, after the renewable energy tax credits were allowed to expire even briefly, installations of new wind farms fell 92 percent, causing a loss of 30,000 jobs across the industry that year. After Congress renewed the PTC, the U.S. wind energy industry added 23,000 jobs the following year, bringing the total to 73,000 at the end of 2014. According to the U.S. Department of Energy, wind energy can support 380,000 jobs in just 15 years.
Related Content
Plant tour: Hexagon Purus, Kassel, Germany
Fully automated, Industry 4.0 line for hydrogen pressure vessels advances efficiency and versatility in small footprint for next-gen, sustainable composites production.
Read MoreAchieving composites innovation through collaboration
Stephen Heinz, vice president of R&I for Syensqo delivered an inspirational keynote at SAMPE 2024, highlighting the significant role of composite materials in emerging technologies and encouraging broader collaboration within the manufacturing community.
Read MoreDrag-based wind turbine design for higher energy capture
Claiming significantly higher power generation capacity than traditional blades, Xenecore aims to scale up its current monocoque, fan-shaped wind blades, made via compression molded carbon fiber/epoxy with I-beam ribs and microsphere structural foam.
Read MoreInfinite Composites: Type V tanks for space, hydrogen, automotive and more
After a decade of proving its linerless, weight-saving composite tanks with NASA and more than 30 aerospace companies, this CryoSphere pioneer is scaling for growth in commercial space and sustainable transportation on Earth.
Read MoreRead Next
Developing bonded composite repair for ships, offshore units
Bureau Veritas and industry partners issue guidelines and pave the way for certification via StrengthBond Offshore project.
Read MorePlant tour: Daher Shap’in TechCenter and composites production plant, Saint-Aignan-de-Grandlieu, France
Co-located R&D and production advance OOA thermosets, thermoplastics, welding, recycling and digital technologies for faster processing and certification of lighter, more sustainable composites.
Read MoreVIDEO: High-volume processing for fiberglass components
Cannon Ergos, a company specializing in high-ton presses and equipment for composites fabrication and plastics processing, displayed automotive and industrial components at CAMX 2024.
Read More