ÂÌñÏ×ÆÞ

 (Cologne, Germany) is now offering customers — specifically those processing Durethan polyamides and Pocan polyesters (PBT) — certified values for the carbon footprint of the base resins. Certification was done by an accredited verification body and includes not only the polyamide 6 (PA6) precursor caprolactam but also the glass fibers manufactured by Lanxess in Antwerp, Belgium. 

“These certified values enable our customers to more accurately estimate the climate friendliness of their products and identify ways of further reducing their CO₂ emissions,” Guenter Margraf, head of sustainability and product management in the High Performance Materials (HPM) business unit, says. “The values are also an important part of life cycle analyses, which are increasingly being used in the automotive and electrical and electronics industry to systematically analyze how products impact the environment from manufacturing through to disposal.”

Featured Content

Assembling the Multifunctional Fuselage Demonstrator: The final welds READ MORE

Development of a composite liquid hydrogen tank for commercial aircraft READ MORE

Automated Composites Knowledge Center READ MORE

The values were calculated according to the standard ISO 14067:2018 for the carbon footprint of products. The analysis factored in all the major emissions that occur up to the point at which the product leaves the Lanxess factory gate (cradle-to-gate). These include not only direct emissions (scope 1) but also indirect emissions from the purchase of energy (scope 2) as well as the emissions that occur in the upstream supply chain, for example those associated with the raw materials used and transportation processes (scope 3).

Lanxess is looking to use the certified carbon footprints for identifying ways to reduce the level of greenhouse gases (GHGs) emitted during plastic production.

“We were especially pleased to learn that, with 3.66 metric tons of CO₂ equivalents emitted per metric ton of PA6 produced, the carbon footprint of our PA6 base resin is much smaller than the current published European industry average,” Margraf adds. One reason for this is that Lanxess synthesizes the plastic in a highly integrated plant network in Antwerp. From 2024 onward, the carbon footprint of PA6 production is set to improve significantly yet again when, in 2023, if all goes to schedule, the company will be opening a second nitrous oxide reduction facility. “Reducing nitrous oxide cuts the direct emissions associated with PA6 production by almost 90%,” Margraf says. Lanxess is also looking to use sustainable raw material sources for caprolactam with a goal to reduce the carbon footprint of its PA6 to less than three metric tons of CO₂ equivalents. The certification also revealed that the carbon footprint of its PBT base resin was less than that of many other manufacturers.

In glass fiber production, Lanxess also cites a significantly smaller carbon footprint compared with most of its competitors. “This applies in particular to our resource-efficient Eco glass fibers, which, with a carbon footprint of 0.4 metric tons of CO₂ equivalents per metric ton of glass fiber, save more than 70% of emissions compared with the published industry average. We use industrial glass waste in our production, which reduces the consumption of raw materials and energy and avoids waste,” Margraf notes.

Lanxess is looking to use the certified carbon footprints for identifying ways to reduce the level of greenhouse gases (GHGs) emitted during plastic production. One focus is on the use of sustainable raw materials. New product ranges such as Durethan Blue, Durethan Eco or Pocan Eco are currently being extended that contain a significant proportion of circular (recycled or bio-based) raw materials or have a carbon footprint that is considerably smaller than conventional products. The sustainable origin of those raw materials is certified according to the International Sustainability and Carbon Certification (ISCC) Plus standard. The certification is coupled with mass balancing, which enables the share of sustainable material in the end product to be determined and subsequently indicated in a transparent manner for processors. One product example is the 60% glass fiber-reinforced Durethan BLUEBKV60H2.0EF. In this PA6 compound, 92% of the raw materials have been replaced by sustainable alternatives, according to the company.

In August 2022, the specialty chemicals company announced its mission to make its upstream and downstream supply chains climate-neutral by 2050. This encompasses indirect emissions associated with purchased raw materials in particular, but also emissions associated with its logistics processes and end products. By 2030, the aim is to cut scope 3 emissions by 40% compared with the reference year 2015. For direct emissions in production (scope 1) and energy sources (scope 2), Lanxess announced three years ago its intention to achieve climate neutrality by 2040.