Stratolaunch completes second TA-0 captive carry flight
The ongoing flight test program continues on target towards separation test and the first hypersonic flight of TA-1 within the first half of 2023.
Photo Credit: Gauntlet Aerospace/Christian Turner
Reported by Airframer.com, (Mojave, Calif., U.S.) successfully completed its second captive carry flight (CW reported on the first in November 2022) with the Talon-A separation test vehicle, TA-0. This marks the ninth flight for the company’s all-composite, twin fuselage, low Earth orbit (LEO)-capable launch platform, Roc.
notes that the flight “set a new duration record lasting a total of six hours and reached a maximum altitude of 22,500 feet.” Primary test objectives included flying outside of the local Mojave area for the first time and the evaluation of the separation environment. Onboard data systems on Roc and TA-0 are said to have provided the company critical information regarding aerodynamic loads and moments prior to TA-0’s release, helping to ensure safe separation of the vehicle from Roc. The flight team also practiced chase formation and communication sequencing for the upcoming separation test.A flight data review will determine the next steps on the test timeline.
In November 2022, Stratolaunch also received a contract with the U.S. Air Force Research Laboratory (AFRL, Wright-Patterson Air Force Base, Ohio, U.S.) to support the flight test of the company’s first expendable Talon-A hypersonic test vehicle, TA-1. Stratolaunch anticipates flying the vehicle in the first quarter of 2023.
The first Talon-A vehicle is an expendable configuration. The next generation of Talon-A vehicles will be capable of reusable hypersonic flight.
Related Content
-
“Structured air” TPS safeguards composite structures
Powered by an 85% air/15% pure polyimide aerogel, Blueshift’s novel material system protects structures during transient thermal events from -200°C to beyond 2400°C for rockets, battery boxes and more.
-
Otto Aviation launches Phantom 3500 business jet with all-composite airframe from Leonardo
Promising 60% less fuel burn and 90% less emissions using SAF, the super-laminar flow design with windowless fuselage will be built using RTM in Florida facility with certification slated for 2030.
-
Plant tour: Airbus, Illescas, Spain
Airbus’ Illescas facility, featuring highly automated composites processes for the A350 lower wing cover and one-piece Section 19 fuselage barrels, works toward production ramp-ups and next-generation aircraft.