ÂÌñÏ×ÆÞ

Back in April 2011, we started publishing on the CW Web site a report titled, “Composite resins price change report,” a running list of resin matrix price increase announcements. These announcements, typically submitted by manufacturers of “industrial” resins like polyesters, vinyl esters and gel coats, usually go something like this:

“Company XYZ, all unsaturated polyester resins, vinyl ester resins and ancillary products, in Europe, increase by €80/metric ton. Effective for all orders shipped on or after June 8, 2015.”

Featured Content

Bladder-assisted compression molding derivative produces complex, autoclave-quality automotive parts READ MORE

Assembling the Multifunctional Fuselage Demonstrator: The final welds READ MORE

Development of a composite liquid hydrogen tank for commercial aircraft READ MORE

Included with each announcement, but not published in our running list (which you can find it ), is a statement of some sort from the manufacturer, justifying the price increase. It usually goes something like this:

“‘A sharp increase in the pricing of our key raw materials has left us no choice but to raise the prices of our products as a result,’ explains Joe Smith, Company ABC sales director.”

It goes without saying, I suppose, that price changes are always increases — we’ve not received a price decrease announcement in the 10 years that I’ve been CW editor. Further, since we started this report, I’ve noticed a striking trend: Price change announcements tend to come in waves. That is, I will receive a press release from one supplier announcing a price increase; this will be followed within a few days by press releases from other suppliers, announcing similar increases for similar products.

If you study the CW “Composite resins price change report” for just a few minutes, you can easily detect this “clumping” of price change announcements. You will notice that since 2011, prices have increased, on average, every other month or so. This is not universally true for every resin supplier, but there is a certain regularity in the frequency of price increases.

What drives resin pricing, in part, is the cost of feedstocks (the “raw materials” cited above by our fictional Joe Smith), which are derived primarily from petroleum-based products. So, as oil and natural gas prices rise, so do the prices of the resins derived from them. Of course, as we are all keenly aware, the price of crude oil has, over the past year, dropped precipitously. As I write this, in mid-November, crude oil costs about US$41/barrel. And, according to the US Energy Information Admin. (EIA), crude oil costs will remain in the US$45-$50/barrel territory through 2016.

Given this, it should come as no surprise that it’s been some time since I’ve received a resin price increase announcement. In fact, the last one was July 15, 2015. This represents the longest time we’ve gone without a resin price increase.

What does this mean to you, the composites professional who has to pay for these resins? The upside is that your material and transportation costs are, likely, relatively stable, which makes budgeting and planning more manageable. However, if you are a composites fabricator who supplies parts and structures to the oil patch, the news is not so good. The number of new wells tapped in the US has dropped in proportion to the decrease in crude oil prices, which means reduced demand for composite piping and downhole supplies like hydraulic fracturing plugs.

On top of this, some of the same suppliers that produce the polyesters and vinyl esters at issue here are also working on bio-based resins that are designed to help ween the composites industry of its dependence on petroleum. Technical editor Sara Black explores these products this month (see "Green resins: Closer to maturity," under "Editor's Picks" at top right); her research reveals that bio-based resins are the target of strong R&D work that shows great promise, but low oil prices are making the price premium for bio-resins difficult for customers to swallow.

However this drop in energy prices affects you, it is understood that nothing is permanent — change is always not far away. And we’ll keep an eye on those resin prices and let you know when that change arrives.