Renco USA brings Lego-style composite building system to construction
After more than a decade dedicated to R&D, evaluation and testing, the company has proven its MCFR building system in a Lakewood Village project in Florida.
Source | Renco USA Inc.
(Miami, Fla., U.S.) has brought its mineral composite, fiber-reinforced (MCFR) building system — using repurposed resins, glass fibers and naturally occurring calcium compounds — to residential construction in an effort to design strong, resilient and sustainable structures.
The system “uses blocks that interlock like Lego bricks to create everything from structural walls to floors and roofs,” according to , bonded together with a methyl methacrylate bonding agent, similar to that already used for aerospace, marine and large truck connections. Not only does this reduce cost, Renco USA reports, but it also enables for rapid assembly with less people — a four-building multifamily project in Palm Springs, Florida, “required a crew of only about 11 workers with varying levels of skill and experience,” to construct it in about 8 weeks, following color-coded plans.
Notably, reports ENR, “Renco USA’s MCFR system qualifies for LEED points for its recycled content, is rated to withstand winds up to approximately 275 miles per hour and its blocks, joists, decking and adhesives have passed tests in ANSI-certified laboratories for structural performance, physical characteristics and fire resistance.” The material has also been certified to withstand Category 5 hurricanes and jas successfully passed more than 400 safety tests to design and install its products under the International Building Code.
The Renco system won Construction Product Design of the Year at the BLT Built Design Awards in 2023 in Lucerne, Switzerland. It was also one of 11 JEC Innovation Award winners.
Related Content
-
Natilus announces Horizon blended wing body CFRP aircraft for 200-passenger narrowbody market
Following its Kona cargo aircraft with 460 pre-orders, this larger all-CFRP model responds to airlines’ request to fill Boeing and Airbus gap with 25% less weight, 40% greater capacity and 50% less carbon emissions, to enter service by early 2030s.
-
Russia exits from COMAC CR929 program, MS-21 experiences delays
Reports confirm Russia’s step away from the CR929 widebody aircraft and impending delays in MS-21 deliveries, long-term consequences from Western-imposed sanctions.
-
Al Seer Marine, Abu Dhabi Maritime unveil world’s largest 3D-printed boat
Holding the new Guinness World Record at 11.98 meters, the 3D-printed composite water taxi used a CEAD Flexbot to print two hulls in less than 12 days.