Queen’s University Belfast presents research in thermoplastic drilling performance optimization
Researchers have published findings from a multi-objective optimization study on carbon fiber-reinforced PEKK drilling in an effort to better understand the material for use in aviation fastenings.
Source | Queen’s University of Belfast
Researchers from the (Northern, Ireland) have reported significant advancement in optimizing the drilling performance of carbon fiber-reinforced polyetherketoneketone (CF/PEKK), a thermoplastic composite attracting growing interest in the aviation industry for its toughness, reparability and recyclability.
Mechanical fastening through riveting remains a critical process, particularly for load-bearing components and joints composed of dissimilar materials like metals and composites. Drilling of composite materials often results in damage, such as delamination under improper or suboptimal conditions, contributing to as much as 60% part rejection during aircraft assembly. While traditional research has largely focused on drilling thermoset carbon fiber-reinforced epoxy (CF/epoxy), little is known about the performance of novel thermoplastics like CF/PEKK.
Addressing this gap, the Queen’s research team has conducted what is contended to be the first multi-objective optimization study on CF/PEKK drilling. Their work targets minimizing hole damage and improving production efficiency, employing a hybrid optimization algorithm that integrates Non-dominated Sorting Genetic Algorithm-II (NSGA-II) and Techniques for Order of Preference by Similarity to Ideal Solution (TOPSIS). The study also incorporated in situ temperature monitoring using an infrared thermal camera, successfully minimizing drilling damage within tolerance levels as per industrial standards.
The team assessed CF/PEKK’s drilling performance alongside traditional CF/epoxy. The results revealed that CF/PEKK requires markedly different drilling parameters than CF/epoxy, owing to its thermoplastic nature and thermal and mechanical behavior during machining.
Dr. Dan Sun and Dr. Jia Ge, who led the research, state: “Our findings underscore the distinct properties of CF/PEKK and emphasize the need for specialized optimization strategies. This research represents a significant step forward in harnessing the full potential of thermoplastic composites in high-performance sectors like aerospace.”
For more information and to access the full report, visit this .
Related Content
-
Developing milling for CMC because grinding takes too long
Economical processes that can cut machining time by 70% are being tested on aeroengine turbine blade demonstrators by Hufschmied and DLR in the SCANCUT project.
-
Addressing rivet hole drilling challenges for aerospace composites
Kennametal explores technological advancements in composite drilling, including stacked laminates, to meet aerospace applications and sustainability challenges.
-
From the CW Archives: Drilling is not for the faint of heart
This edition of From the CW Archives revisits CW’s first plant tour — a visit to the F-35 FAL in Fort Worth, Texas — and a story by Ginger Gardiner a few years later. Both offer lessons on how to perform stacked drilling through composite and metallic materials.
